Right-angle U-type silicon carbide heating element is a commonly used electric heating component for high-temperature heating applications.

Structural Features: The right-angle U-type silicon carbide heating element adopts a solid structure. Its U-shaped section is integrally formed, which reduces welding joints, avoids unreliable welding, and enlarges the heating surface area.

Performance Parameters: Its load is determined by the load density of the silicon carbide heating element. The load density directly governs the load and quantity of rods. The higher the furnace temperature, the lower the allowable load density. At the same furnace temperature, higher load density accelerates the aging of the silicon carbide heating element.

Precautions for Use: Inspect for cracks and measure resistance before installation; ensure tight contact at the cold-end wiring parts. During operation, avoid heavy impact and splashing of molten aluminum. Replace burnt or broken rods promptly once found. Fully preheat before installation to prevent damage caused by rapid heating. Continuous operation is recommended to extend service life.